Handled Liquid
Domestic and industrial waste water, raw sewage, viscous and corrosive liquids, liquid with fibrous and solid substance.
Technical Data
| Discharge Flange | DN 40….DN 300 mm |
|---|---|
| Capacity | up to 1500 m3/h |
| Head | up to 95 m |
| Speed | up to 2950 rpm |
| Operating Temperature | -10 C -+115 C* |
| Casing Pressure (Pmax) | 10 bar (16 bar)* |
| ( Pmax : Suction Pressure + Shut off Head) | |
| ( * ) The material of pump differ according to the type of pumped liquid, operating temperature and pressure. Contact our company for detailed information. | |
- 15 basic sizes covering wide range of operational area.
- Due to the back-pull-out design the complete bearing assembly including impeller and shaft can be dismantled without removing the volute casing from the piping system.
- Suction and discharge flanges conforming to TS EN 1092 / PN10 (PN16*)
- All impellers are dynamically balanced according to ISO 1940 Class 6.3.
- Axial thrust is balanced by back balancing ribs.
- Horizontal, radially split volute casing type, single stage, end suction centrifugal pumps with enclosed or semi-open impeller.
- Depending on the type of application different mechanical seals and soft packing is applicable.
Design Features
- Horizontal, radially split volute casing type, single stage, end suction centrifugal pumps with enclosed or semi-open impeller.
Shaft Sealing
- Depending on the type of application different mechanical seals and soft packing is applicable.
Pump Designation
| Pump Type | -PC |
|---|---|
| Vertical Installation | -V-M |
| Discharge (DN-mm) | 250 |
| Impeller Type | XX |