SDS/SDS-V DOUBLE SECTION PUMPS

Handled Liquid

SDS/SDS-V type pumps are suitable for clean or slightly contaminated liquids with low viscosity.

Technical Data

Discharge Flange DN 65…..DN 700 mm
Capacity up to 6000 m3/h
Head up to 180 m
Speed up to 2900 rpm
Operating  Temperature -20 C up to +80 C
Casing Pressure (Pmax) 16 bar 25 bar*
( Pmax : Suction Pressure + Shut off Head)
( * ) The material of pumps differ according to the type of pumped liquid, operating temperature and pressure, Contact our company for detailed information.
  • Flanges are conforming to ISO 7005-2 / PN 16 or PN 25.
  • Impeller is of double suction. This feature increases pump suction performance in addition it provides the balance of hydraulic axial forces.
  • All impeller are balanced statically and dynamically according to ISO 1940 class 6.3.
  • Horizontal and vertical configuration.
  • Suction and discharge flanges are on the same axis at the bottom casing. Split case design permits easy disassembly of the rotor group for maintenance or repair without distorting pump alignment and suction and discharge piping.
  • Different soft packing and mechanical seal types are available.

Design Features

  • Horizontal and vertical configuration.
  • Suction and discharge flanges are on the same axis at the bottom casing. Split case design permits easy disassembly of the rotor group for maintenance or repair without distorting pump alignment and suction and discharge piping.

Shaft Sealing

  • Different soft packing and mechanical seal types are available.

Pump Designation

Pump Type -SDS-V
Discharge Nozzle (DN-mm) 200
Nominal Impeller Diameter (mm) -500
TOP
Back