Handled Liquid
SNM/SNM-V type pumps are suitable for non-aggressive, non-explosive, clean or slightly contaminated liquids with low viscosity
Technical Data
| Discharge Flange | DN 32__DN 150 mm |
|---|---|
| Capacity | up to 500 m3/h |
| Head | up to 95 m |
| Speed | up to 2900 rpm |
| Motor Rating | up to 55 kW+ |
| Operating Temperature | -10 C up to +110 bar C |
| Casing Pressure (Pmax) | 10 bar (16 bar) |
| Speed | Shaft Sealing |
| ( Pmax : Suction Pressure + Shut off Head) | |
| ( * ) Please contact our company for pumps with motor over 55 kW. | |
| ( * ) The material of pumps differ according to the type of pumped liquid, operating temperature and pressure, Contact our company for detailed information. | |
Features
- Main dimensions of casing according to EN 733.
- Suction and discharge flanges are conforming to ISO 1092-2/PN 16.
- SNM / SNM-V pumps are direct coupled with NORM electric motors comply with the VDI standards and IEC frame sizes.
- SNM / SNM-V type Closed-coupled pumps are lighter and smaller compared to the norm centrifugal pumps of same hydraulic specifications.
- Close-coupled, volute casing, single stage, end suction centrifugal pump with closed impeller
- Single mechanical seal, flushed by pumped liquid,
Design Features
- Close-coupled, volute casing, single stage, end suction centrifugal pump with closed impeller
Shaft Sealing
- Single mechanical seal, flushed by pumped liquid.
Pump Designation
| Pump Type | STM |
|---|---|
| Discharge Nozzle (DN-mm) | 100 |
| Nominal Impeller Diameter (mm) | -250 |