Handled Liquid
SCP Type pumps are suitable for clean or slightly contaminated liquids with low viscosity
Technical Data
| Suction Flange | DN 50__DN 300 mm |
|---|---|
| Discharge Flange | DN 32__DN 250 mm |
| Capacity | up to 1700 m3/h |
| Head | up to 140 m |
| Speed | up to 2900 rpm |
| Operating Temperature | -20 C -+175 C* |
| Casing Pressure (Pmax) | 16 bar (25 bar)* |
| ( Pmax : Suction Pressure + Shut off Head) | |
| ( * ) The material of pump differ according to the type of pumped liquid, operating temperature and pressure. Contact our company for detailed information. | |
- Due to the back-pull-out design the complete bearing assembly including impeller and shaft can be dismantled without removing the volute casing from the pipe system.
- All impellers are dynamically balanced according to ISO 1940 Class 6.3.
- Axial thrust is balanced in closed impeller by wear ring/balancing hole system and in semi-open impeller by back ribs.
- Heavy duty shaft not in contact with the medium handled (dry Shaft).
- For casing sealing, confined gaskets are used to prevent blow-out under pressure.
- Horizontal, single stage, radially split volute casing type, end suction centrifugal pumps with enclosed impeller
- In addition to 26 basic size conforming with EN 22858/ISO 2858, there are 10 additional sizes. Dimensions of additional sizes may differ from other suppliers.
- Suction and discharge flanges conforming to ISO 700/PN16.
- Depending on request or requirement, pumps with soft packing or single, double and cartridge type mechanical seals can be supplied.
- External seal cooling system may be used if required.
Design Features
- Horizontal, single stage, radially split volute casing type, end suction centrifugal pumps with enclosed impeller
- In addition to 26 basic size conforming with EN 22858/ISO 2858, there are 10 additional sizes. Dimensions of additional sizes may differ from other suppliers.
- Suction and discharge flanges conforming to ISO 700/PN16.
Shaft Sealing
- Depending on request or requirement, pumps with soft packing or single, double and cartridge type mechanical seals can be supplied.
- External seal cooling system may be used if required.
Pump Designation
| Pump Type | -SCP |
|---|---|
| Discharge Nozzle (DN-mm) | 125 |
| Nominal Impeller Diameter (mm) | -315 |
| Impeller Type (A: semi-open) | -A |