Handled Liquid
C type pumps are suitable for pumping industrial and domestic raw sewage, and waste water.
Technical Data
| Discharge Flange | DN 50….DN 300 mm |
|---|---|
| Capacity | up to 1600 m3/h |
| Head | up to 95 m |
| Speed | up to 2900 rpm |
| Operating Temperature | up to 40o C* |
| Casing Pressure (Pmax) | 10 bar* |
| ( Pmax : Suction Pressure + Shut off Head) | |
| ( * ) The material of pump differ according to the type of pumped liquid, operating temperature and pressure. Contact our company for detailed information. | |
- 15 basic sizes covering wide range of operational area.
- Due to the back-pull-out design, the complete bearing assembly including impeller and shaft seal can be dismantled without removing the volute casing from the piping system.
- Suction and discharge flanges according to TS EN 1092 / PN10.
- All impellers are balanced dynamically according to ISO 1940 class 6.3.
- Axial thrust is balanced by back balancing ribs.
- Vertical, wide volute casing, single stage, end suction centrifugal pump with enclosed, semi-open or vortex types impeller.
- Depending on the operation conditions (liquid specifications, temperature, etc.)different types of mechanical seals are used.
Design Features
- Vertical, wide volute casing, single stage, end suction centrifugal pump with enclosed, semi-open or vortex types impeller.
Shaft Sealing
- Depending on the operation conditions (liquid specifications, temperature, etc.)different types of mechanical seals are used.
Pump Designation
| Pump Type | -C |
|---|---|
| Discharge Nozzle (DN-mm) | 100 |
| Nominal Impeller Diameter | -240 |
| Impeller Type | B |