Handled Liquid
STN Type pumps are suitable for clean or slightly contaminated liquids with low viscosity
Technical Data
Suction Flange | DN 50__DN 300 mm |
---|---|
Suction Flange | DN 50__DN 300 mm |
Suction Flange | DN 50__DN 300 mm |
Suction Flange | DN 50__DN 300 mm |
( Pmax : Suction Pressure + Shut off Head) | |
( * ) The material of pump differ according to the type of pumped liquid, operating temperature liquid, Contact our company for detailed information. |
Features
- The suction and discharge flanges are conforming to ISO 7005-2/PN 16.
- Due to the back-pull-out design the complete bearing assembly including impeller and stuffing box cover can be dismantled without removing the volute casing from pipe system.
- All impellers are balanced statically and dynamically according to ISO 1940 Class 6.3.
- Axial thrust is balanced by wear ring/balancing holoes system
- Horizontal, radially split volute casing type, single stage end suction centrifugal pump with enclosed impeller
- Dimensionally complies with EN 733.
- In addition to 29 basic size conforming with EN 733, there are 20 additional sizes
- In standard production soft packed stuffing boxes are used.
- Depending on customer requirement mechanical seals are available. In this case, pump Shaft is Always Stainless Steel.
Design Features
- Horizontal, radially split volute casing type, single stage end suction centrifugal pump with enclosed impeller
- Dimensionally complies with EN 733.
- In addition to 29 basic size conforming with EN 733, there are 20 additional sizes
Shaft Sealing
- In standard production soft packed stuffing boxes are used.
- Depending on customer requirement mechanical seals are available. In this case, pump Shaft is Always Stainless Steel.
Pump Designation
Suction Flange | DN 50__DN 300 mm |
---|---|
Suction Flange | DN 50__DN 300 mm |
Suction Flange | DN 50__DN 300 mm |
Suction Flange | DN 50__DN 300 mm |
( Pmax : Suction Pressure + Shut off Head) | |
( * ) The material of pump differ according to the type of pumped liquid, operating temperature liquid, Contact our company for detailed information. |